Feel free to reach out to me at Discord with any questions or leave them in the [issues section](https://github.com/jamisonderek/flipper-zero-tutorials/issues) for this project.
[game](./vgm/apps/air_labyrinth/README.md) - This is a game where you control a ball through a maze. The game uses the accelerometer in the Video Game Module to control the ball. For best experience, it is recommended to connect the VGM to the HDMI input on a TV. The game is also displayed on the Flipper Zero's screen.
NOTE: This game uses the game `engine`, so you must recursively clone the `flipper-zero-tutorials` repository to get the `engine` submodule, or download the [https://github.com/flipperdevices/flipperzero-game-engine](https://github.com/flipperdevices/flipperzero-game-engine) into a folder called `./vmg/apps/air_labyrinth/engine`.
### [spreadsheet](./rfid/README.md) - This is a spreadsheet that can be used to convert RFID data from one format to another, and to create new credentials with a shared facility code. It can also be used to create RFID data for the T5577 chip.
[tutorial](./firmware/updating/README.md) - The Flipper Zero makes updating the firmware simple and fairly safe. It is easy to build your own firmware as well using the fbt command.
[project](./gpio/wiegand/README.md) - This is a tool for reading and writing Wiegand data. Wiegand is typically used by NFC, RFID and keypads. This tool can be used to read a Wiegand signal, save and display the data on the Flipper Zero's screen. It can also play the signal back.
[tool](./gpio/pins/README.md) - This is a set of files you can copy to your Flipper Zero so that you can easily lookup the meaning of a pin.
### hc_sr04
[project](./gpio/hc_sr04/README.md) - This is an improvement over the original HC_SR04 library so that you can get mm accuracy in measurements. It displays ultrasonic distance in both inches/cm. The readme explains how the code gets more accurate timings.
### gpio-gpio-7segment
[project](./gpio/gpio_7segment/README.md) - This application can control a common-anode or common-cathode 7-segment display. When you click the OK button the display shows a random dice roll (1-6); but you can modify code to display any number from 0-9.
[tutorial](./gpio/gpio_interrupt_demo/README.md) - This is a "hello world" demonstration of triggering a callback when a GPIO pin transitions from VCC to GND.
[tutorial](./gpio/memsic_2125/README.md) - This is a demostration of using GPIO interrupts to interpret data from the Memsic 2125 (Mx2125) Dual-Axis Accelerometer.
[tutorial](./subghz/plugins/subghz_demo/README.md) - This is a demonstration of sending & receiving radio signals using the subghz_tx_rx worker library.
This is a two player game that uses the subghz_tx_rx worker library for communication. Two Flipper Zeros running this game can play Rock, Paper, Scissors against each other!
[project](./subghz/protocols/x10/README.md) - This is a protocol decoder for the Flipper Zero to decode the x10 series of devices when doing a read from the Sub-GHz menu.
[tutorial](./marauder/README.md) - This is a tutorial on how to use the Marauder tool to attack 2.4GHz devices.
[tool](./marauder/secret_ssid/README.md) - This is a tool that can be used to send a secret message over WiFi. The message is encoded into a SSID, which is then sent out over WiFi. The message can be decoded on a PC.
