Add initial subghz-protocol-x10-decoder project
This commit is contained in:
Derek Jamison
parent
b8972e54fd
commit
65721becff
@ -1,2 +1,8 @@
|
||||
# flipper-zero-tutorials
|
||||
I will use this repository for my Flipper Zero projects. The various README.md files should describe how to use the files on your Flipper Zero.
|
||||
|
||||
Feel free to reach out to me at CodeAllNight@outlook.com with any questions or leave them in the [issues section](https://github.com/jamisonderek/flipper-zero-tutorials/issues) for this project.
|
||||
|
||||
|
||||
## subghz-protocol-x10-decoder
|
||||
[project](./subghz/protocols/x10/README.md) - This is a protocol decoder for the Flipper Zero to decode the x10 series of devices when doing a read from the Sub-GHz menu.
|
||||
|
||||
61
subghz/protocols/x10/README.md
Normal file
61
subghz/protocols/x10/README.md
Normal file
@ -0,0 +1,61 @@
|
||||
# X10 Decoder
|
||||
## Introduction
|
||||
This is a protocol decoder for the Flipper Zero to decode the X10 series of devices when doing a read from the Sub-GHz menu.
|
||||
|
||||
|
||||
## Validation
|
||||
NOTE: As an Amazon Associate I (CodeAllNight) earn from qualifying purchases from the amzn.to links below.
|
||||
|
||||
The code was tested with the "X10 Camera Control System Remote Control Model CR12A" which you can purchase from
|
||||
https://amzn.to/3issZPs and should also be compatible with signals from https://amzn.to/3QEF7cM
|
||||
|
||||
The receiver I used is no longer for sale, but a similar module can be purchased from https://amzn.to/3CFWy6M
|
||||
|
||||
The House (Channel) is A-P setting.
|
||||
The Unit (Button) is 1-16 setting (slider switches between 1-8 and 9-16).
|
||||
The signal is "On" or "Off". For each channel there is also a "Dim" or "Bright".
|
||||
|
||||
The signal is broadcast at 310MHz with a modulation of AM650.
|
||||
|
||||
|
||||
## Installation Directions
|
||||
This project is intended to be overlayed on top of an existing firmware repo.
|
||||
- Clone an existing flipper zero firmware repo
|
||||
- Build the firmware
|
||||
- Deploy the firmware
|
||||
- Confirm the firmware is working properly
|
||||
- Add the x10.c file to the \lib\subghz\protocols folder
|
||||
- Add the x10.h file to the \lib\subghz\protocols folder
|
||||
- Update the \lib\subghz\protocols\protocol_items.h file
|
||||
- After all of the other #include statements add the following line:
|
||||
```
|
||||
#include "x10.h"
|
||||
```
|
||||
- Update the \lib\subghz\protocols\protocol_items.c file
|
||||
- After all of the other &subghz_protocol_{name}, entries add the following:
|
||||
```
|
||||
&subghz_protocol_x10,
|
||||
```
|
||||
- NOTE: Your updated files should look similar to the protocol_items.c and protocol_items.h in this project.
|
||||
- Build the firmware
|
||||
- Deploy the firmware
|
||||
|
||||
|
||||
## Running the updated firmware
|
||||
These directions assume you are starting at the flipper desktop. If not, please press the back button until you are at the desktop.
|
||||
|
||||
- Press the OK button on the flipper to pull up the main menu.
|
||||
- Choose "Sub-GHz" from the menu.
|
||||
- Choose "Read" from the sub-menu.
|
||||
- Choose the "Config" option (Click the left arrow)
|
||||
- Change the frequency to 310.00 (Click the left arrow multiple times)
|
||||
- Confirm that Hopping is OFF.
|
||||
- Confirm the Modulation is AM650.
|
||||
- Press the BACK button.
|
||||
- The flipper should say "Scanning... and show 310.00 AM 00/50"
|
||||
|
||||
Click a button on your X10 remote.
|
||||
|
||||
The flipper should show "X10 <some code>"
|
||||
- Press the OK button on the flipper
|
||||
It should show the Channel, Button number and the kind of button (ON/OFF/DIM/BRIGHT).
|
||||
21
subghz/protocols/x10/protocol_items.c
Normal file
21
subghz/protocols/x10/protocol_items.c
Normal file
@ -0,0 +1,21 @@
|
||||
#include "protocol_items.h"
|
||||
|
||||
const SubGhzProtocol* subghz_protocol_registry_items[] = {
|
||||
&subghz_protocol_gate_tx, &subghz_protocol_keeloq, &subghz_protocol_star_line,
|
||||
&subghz_protocol_nice_flo, &subghz_protocol_came, &subghz_protocol_faac_slh,
|
||||
&subghz_protocol_nice_flor_s, &subghz_protocol_came_twee, &subghz_protocol_came_atomo,
|
||||
&subghz_protocol_nero_sketch, &subghz_protocol_ido, &subghz_protocol_kia,
|
||||
&subghz_protocol_hormann, &subghz_protocol_nero_radio, &subghz_protocol_somfy_telis,
|
||||
&subghz_protocol_somfy_keytis, &subghz_protocol_scher_khan, &subghz_protocol_princeton,
|
||||
&subghz_protocol_raw, &subghz_protocol_linear, &subghz_protocol_secplus_v2,
|
||||
&subghz_protocol_secplus_v1, &subghz_protocol_megacode, &subghz_protocol_holtek,
|
||||
&subghz_protocol_chamb_code, &subghz_protocol_power_smart, &subghz_protocol_marantec,
|
||||
&subghz_protocol_bett, &subghz_protocol_doitrand, &subghz_protocol_phoenix_v2,
|
||||
&subghz_protocol_honeywell_wdb, &subghz_protocol_magellan, &subghz_protocol_intertechno_v3,
|
||||
&subghz_protocol_clemsa, &subghz_protocol_ansonic, &subghz_protocol_smc5326,
|
||||
&subghz_protocol_holtek_th12x, &subghz_protocol_x10,
|
||||
};
|
||||
|
||||
const SubGhzProtocolRegistry subghz_protocol_registry = {
|
||||
.items = subghz_protocol_registry_items,
|
||||
.size = COUNT_OF(subghz_protocol_registry_items)};
|
||||
43
subghz/protocols/x10/protocol_items.h
Normal file
43
subghz/protocols/x10/protocol_items.h
Normal file
@ -0,0 +1,43 @@
|
||||
#pragma once
|
||||
#include "../registry.h"
|
||||
|
||||
#include "princeton.h"
|
||||
#include "keeloq.h"
|
||||
#include "star_line.h"
|
||||
#include "nice_flo.h"
|
||||
#include "came.h"
|
||||
#include "faac_slh.h"
|
||||
#include "nice_flor_s.h"
|
||||
#include "came_twee.h"
|
||||
#include "came_atomo.h"
|
||||
#include "nero_sketch.h"
|
||||
#include "ido.h"
|
||||
#include "kia.h"
|
||||
#include "hormann.h"
|
||||
#include "nero_radio.h"
|
||||
#include "somfy_telis.h"
|
||||
#include "somfy_keytis.h"
|
||||
#include "scher_khan.h"
|
||||
#include "gate_tx.h"
|
||||
#include "raw.h"
|
||||
#include "linear.h"
|
||||
#include "secplus_v2.h"
|
||||
#include "secplus_v1.h"
|
||||
#include "megacode.h"
|
||||
#include "holtek.h"
|
||||
#include "chamberlain_code.h"
|
||||
#include "power_smart.h"
|
||||
#include "marantec.h"
|
||||
#include "bett.h"
|
||||
#include "doitrand.h"
|
||||
#include "phoenix_v2.h"
|
||||
#include "honeywell_wdb.h"
|
||||
#include "magellan.h"
|
||||
#include "intertechno_v3.h"
|
||||
#include "clemsa.h"
|
||||
#include "ansonic.h"
|
||||
#include "smc5326.h"
|
||||
#include "holtek_ht12x.h"
|
||||
#include "x10.h"
|
||||
|
||||
extern const SubGhzProtocolRegistry subghz_protocol_registry;
|
||||
287
subghz/protocols/x10/x10.c
Normal file
287
subghz/protocols/x10/x10.c
Normal file
@ -0,0 +1,287 @@
|
||||
#include "x10.h"
|
||||
|
||||
#include "../blocks/const.h"
|
||||
#include "../blocks/decoder.h"
|
||||
#include "../blocks/encoder.h"
|
||||
#include "../blocks/generic.h"
|
||||
#include "../blocks/math.h"
|
||||
|
||||
#define TAG "SubGhzProtocolX10"
|
||||
|
||||
// @CodeAllNight - X10 Packet decoder...
|
||||
//
|
||||
// Do a Sub-GHz read at 310MHz, with 650KHz AM modulation.
|
||||
//
|
||||
// Pulses are as follows...
|
||||
// + 9600 [16*te_short] ~ [te_delta*3] | 9025 [te_delta*7]
|
||||
// - 4875 [8*te_short] ~ [te_delta*3] | 4488 [te_delta*5]
|
||||
//
|
||||
// 32 bits of data (see below)...
|
||||
// + 600 [te_short] | 550
|
||||
// - 600 [te_short] (for 0) or 1800 [te_long] (for 1) | 550 (for 0) or 1700 (for 1) [te_delta*2]
|
||||
//
|
||||
// + 600 [te_short]
|
||||
// -43200 [72*te_short] ~ [te_delta*2]
|
||||
//
|
||||
// Data simplification of 32 bits can the thought of as:
|
||||
// first 8 bits are device id (technically first 4 bits sent are channel #).
|
||||
// second 8 bits are inverted from previous 8 bits.
|
||||
// next 8 bits are command.
|
||||
// last 8 bits are inverted from previous 8 bits.
|
||||
//
|
||||
// Format: SSSSXBXX ssssxbxx DBOQBXXX dboqbxxx
|
||||
// S - The serial number (Channel) is encoded in the first four bits that were sent.
|
||||
// x - Unused bits
|
||||
// B - Bit 6 is set if the button should be button 9-16, instead of buttons 1-8.
|
||||
// DQ - The 1st bit of byte 3 is 1 if DIMMER. (bit 4=0 for BRIGHT, bit 4=1 for DIM)
|
||||
// B - The 2nd bit of byte 3 is the button number.
|
||||
// Q - 3rd bit of byte 3 are 1 for OFF and 0 for ON (unless DIMMER).
|
||||
// B - 4th and 5th bit of byte 3 is the rest of the button number.
|
||||
//
|
||||
// Actual protocol can be found at http://kbase.x10.com/wiki/CM17A_Protocol
|
||||
|
||||
|
||||
static const SubGhzBlockConst subghz_protocol_x10_const = {
|
||||
.te_short = 600,
|
||||
.te_long = 1800,
|
||||
.te_delta = 100,
|
||||
.min_count_bit_for_found = 32,
|
||||
};
|
||||
|
||||
struct SubGhzProtocolDecoderX10 {
|
||||
SubGhzProtocolDecoderBase base;
|
||||
SubGhzBlockDecoder decoder;
|
||||
SubGhzBlockGeneric generic;
|
||||
};
|
||||
|
||||
struct SubGhzProtocolEncoderX10 {
|
||||
SubGhzProtocolEncoderBase base;
|
||||
SubGhzProtocolBlockEncoder encoder;
|
||||
SubGhzBlockGeneric generic;
|
||||
};
|
||||
|
||||
typedef enum {
|
||||
X10DecoderStepReset = 0,
|
||||
X10DecoderStepFoundPreambula,
|
||||
X10DecoderStepSaveDuration,
|
||||
X10DecoderStepCheckDuration,
|
||||
} X10DecoderStep;
|
||||
|
||||
const SubGhzProtocolDecoder subghz_protocol_x10_decoder = {
|
||||
.alloc = subghz_protocol_decoder_x10_alloc,
|
||||
.free = subghz_protocol_decoder_x10_free,
|
||||
.feed = subghz_protocol_decoder_x10_feed,
|
||||
.reset = subghz_protocol_decoder_x10_reset,
|
||||
.get_hash_data = subghz_protocol_decoder_x10_get_hash_data,
|
||||
.serialize = subghz_protocol_decoder_x10_serialize,
|
||||
.deserialize = subghz_protocol_decoder_x10_deserialize,
|
||||
.get_string = subghz_protocol_decoder_x10_get_string,
|
||||
};
|
||||
|
||||
const SubGhzProtocolEncoder subghz_protocol_x10_encoder = {
|
||||
.alloc = NULL,
|
||||
.free = NULL,
|
||||
.deserialize = NULL,
|
||||
.stop = NULL,
|
||||
.yield = NULL,
|
||||
};
|
||||
|
||||
const SubGhzProtocol subghz_protocol_x10 = {
|
||||
.name = SUBGHZ_PROTOCOL_X10_NAME,
|
||||
.type = SubGhzProtocolTypeDynamic,
|
||||
.flag = SubGhzProtocolFlag_315 /* Technically it is 310MHz only */ | SubGhzProtocolFlag_AM |
|
||||
SubGhzProtocolFlag_Decodable,
|
||||
.decoder = &subghz_protocol_x10_decoder,
|
||||
.encoder = &subghz_protocol_x10_encoder,
|
||||
};
|
||||
|
||||
void* subghz_protocol_decoder_x10_alloc(SubGhzEnvironment* environment) {
|
||||
UNUSED(environment);
|
||||
SubGhzProtocolDecoderX10* instance = malloc(sizeof(SubGhzProtocolDecoderX10));
|
||||
instance->base.protocol = &subghz_protocol_x10;
|
||||
instance->generic.protocol_name = instance->base.protocol->name;
|
||||
return instance;
|
||||
}
|
||||
|
||||
void subghz_protocol_decoder_x10_free(void* context) {
|
||||
furi_assert(context);
|
||||
SubGhzProtocolDecoderX10* instance = context;
|
||||
free(instance);
|
||||
}
|
||||
|
||||
void subghz_protocol_decoder_x10_reset(void* context) {
|
||||
furi_assert(context);
|
||||
SubGhzProtocolDecoderX10* instance = context;
|
||||
instance->decoder.decode_data = 0;
|
||||
instance->decoder.decode_count_bit = 0;
|
||||
instance->decoder.parser_step = X10DecoderStepReset;
|
||||
}
|
||||
|
||||
bool subghz_protocol_x10_validate(void* context) {
|
||||
furi_assert(context);
|
||||
|
||||
SubGhzProtocolDecoderX10* instance = context;
|
||||
SubGhzBlockDecoder* decoder = &instance->decoder;
|
||||
uint64_t data = decoder->decode_data;
|
||||
|
||||
return decoder->decode_count_bit >= subghz_protocol_x10_const.min_count_bit_for_found &&
|
||||
((((data >> 24) ^ (data >> 16)) & 0xFF) == 0xFF) &&
|
||||
((((data >> 8) ^ (data )) & 0xFF) == 0xFF);
|
||||
}
|
||||
|
||||
void subghz_protocol_decoder_x10_feed(void* context, bool level, uint32_t duration) {
|
||||
furi_assert(context);
|
||||
SubGhzProtocolDecoderX10* instance = context;
|
||||
|
||||
switch(instance->decoder.parser_step) {
|
||||
case X10DecoderStepReset:
|
||||
if((level) && (DURATION_DIFF(duration, subghz_protocol_x10_const.te_short * 16) <
|
||||
subghz_protocol_x10_const.te_delta * 7)) {
|
||||
instance->decoder.parser_step = X10DecoderStepFoundPreambula;
|
||||
}
|
||||
break;
|
||||
case X10DecoderStepFoundPreambula:
|
||||
if((!level) && (DURATION_DIFF(duration, subghz_protocol_x10_const.te_short * 8) <
|
||||
subghz_protocol_x10_const.te_delta * 5)) {
|
||||
instance->decoder.parser_step = X10DecoderStepSaveDuration;
|
||||
instance->decoder.decode_data = 0;
|
||||
instance->decoder.decode_count_bit = 0;
|
||||
} else {
|
||||
subghz_protocol_decoder_x10_reset(context);
|
||||
}
|
||||
break;
|
||||
case X10DecoderStepSaveDuration:
|
||||
if(level) {
|
||||
if(DURATION_DIFF(duration, subghz_protocol_x10_const.te_short) <
|
||||
subghz_protocol_x10_const.te_delta) {
|
||||
if(instance->decoder.decode_count_bit ==
|
||||
subghz_protocol_x10_const.min_count_bit_for_found) {
|
||||
instance->decoder.parser_step = X10DecoderStepReset;
|
||||
if (subghz_protocol_x10_validate(context)) {
|
||||
FURI_LOG_E(TAG, "Decoded a signal!");
|
||||
instance->generic.data = instance->decoder.decode_data;
|
||||
instance->generic.data_count_bit = instance->decoder.decode_count_bit;
|
||||
|
||||
if(instance->base.callback)
|
||||
instance->base.callback(&instance->base, instance->base.context);
|
||||
}
|
||||
subghz_protocol_decoder_x10_reset(context);
|
||||
} else {
|
||||
instance->decoder.te_last = duration;
|
||||
instance->decoder.parser_step = X10DecoderStepCheckDuration;
|
||||
}
|
||||
} else {
|
||||
subghz_protocol_decoder_x10_reset(context);
|
||||
}
|
||||
} else {
|
||||
subghz_protocol_decoder_x10_reset(context);
|
||||
}
|
||||
break;
|
||||
case X10DecoderStepCheckDuration:
|
||||
if(!level) {
|
||||
if((DURATION_DIFF(instance->decoder.te_last, subghz_protocol_x10_const.te_short) <
|
||||
subghz_protocol_x10_const.te_delta) &&
|
||||
(DURATION_DIFF(duration, subghz_protocol_x10_const.te_short) <
|
||||
subghz_protocol_x10_const.te_delta)) {
|
||||
subghz_protocol_blocks_add_bit(&instance->decoder, 0);
|
||||
instance->decoder.parser_step = X10DecoderStepSaveDuration;
|
||||
} else if(
|
||||
(DURATION_DIFF(instance->decoder.te_last, subghz_protocol_x10_const.te_short) <
|
||||
subghz_protocol_x10_const.te_delta) &&
|
||||
(DURATION_DIFF(duration, subghz_protocol_x10_const.te_long) <
|
||||
subghz_protocol_x10_const.te_delta * 2)) {
|
||||
subghz_protocol_blocks_add_bit(&instance->decoder, 1);
|
||||
instance->decoder.parser_step = X10DecoderStepSaveDuration;
|
||||
} else {
|
||||
subghz_protocol_decoder_x10_reset(context);
|
||||
}
|
||||
} else {
|
||||
subghz_protocol_decoder_x10_reset(context);
|
||||
}
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* Set the serial and btn values based on the data and data_count_bit.
|
||||
* @param instance Pointer to a SubGhzBlockGeneric* instance
|
||||
*/
|
||||
static void subghz_protocol_x10_check_remote_controller(SubGhzBlockGeneric* instance) {
|
||||
instance->serial = (instance->data & 0xF0000000) >> (24+4);
|
||||
instance->btn = (((instance->data & 0x07000000) >> 24) | ((instance->data & 0xF800) >> 8));
|
||||
}
|
||||
|
||||
uint8_t subghz_protocol_decoder_x10_get_hash_data(void* context) {
|
||||
furi_assert(context);
|
||||
SubGhzProtocolDecoderX10* instance = context;
|
||||
return subghz_protocol_blocks_get_hash_data(
|
||||
&instance->decoder, (instance->decoder.decode_count_bit / 8) + 1);
|
||||
}
|
||||
|
||||
bool subghz_protocol_decoder_x10_serialize(
|
||||
void* context,
|
||||
FlipperFormat* flipper_format,
|
||||
SubGhzRadioPreset* preset) {
|
||||
furi_assert(context);
|
||||
SubGhzProtocolDecoderX10* instance = context;
|
||||
return subghz_block_generic_serialize(&instance->generic, flipper_format, preset);
|
||||
}
|
||||
|
||||
bool subghz_protocol_decoder_x10_deserialize(void* context, FlipperFormat* flipper_format) {
|
||||
furi_assert(context);
|
||||
SubGhzProtocolDecoderX10* instance = context;
|
||||
bool ret = false;
|
||||
do {
|
||||
if(!subghz_block_generic_deserialize(&instance->generic, flipper_format)) {
|
||||
break;
|
||||
}
|
||||
if(instance->generic.data_count_bit !=
|
||||
subghz_protocol_x10_const.min_count_bit_for_found) {
|
||||
FURI_LOG_E(TAG, "Wrong number of bits in key");
|
||||
break;
|
||||
}
|
||||
ret = true;
|
||||
} while(false);
|
||||
return ret;
|
||||
}
|
||||
|
||||
const char* CHANNEL_LETTERS = "MNOPCDABEFGHKLIJ";
|
||||
void subghz_protocol_decoder_x10_get_string(void* context, FuriString* output) {
|
||||
furi_assert(context);
|
||||
SubGhzProtocolDecoderX10* instance = context;
|
||||
subghz_protocol_x10_check_remote_controller(&instance->generic);
|
||||
|
||||
char code_channel = CHANNEL_LETTERS[(instance->generic.serial & 0x0F)];
|
||||
|
||||
uint32_t code_button = 1 + (
|
||||
((instance->generic.btn&0x10) >> 4) |
|
||||
((instance->generic.btn&0x8) >> 2) |
|
||||
((instance->generic.btn&0x40)>>4) |
|
||||
((instance->generic.btn&4)<<1));
|
||||
|
||||
char* code_action = (instance->generic.btn & 0x20) == 0x20 ? "Off" : "On";
|
||||
if (instance->generic.btn == 0x98) {
|
||||
code_button = 0;
|
||||
code_action = "Dim";
|
||||
} else if (instance->generic.btn == 0x88) {
|
||||
code_button = 0;
|
||||
code_action = "Bright";
|
||||
}
|
||||
|
||||
furi_string_cat_printf(
|
||||
output,
|
||||
"%s %dbit\r\n"
|
||||
"Channel:%c \r\n"
|
||||
"Button:%ld %s\r\n\r\n"
|
||||
"Key:%lX%08lX\r\n"
|
||||
"Sn:%07lX Btn:%X\r\n",
|
||||
instance->generic.protocol_name,
|
||||
instance->generic.data_count_bit,
|
||||
code_channel,
|
||||
code_button,
|
||||
code_action,
|
||||
(uint32_t)(instance->generic.data >> 32),
|
||||
(uint32_t)instance->generic.data,
|
||||
instance->generic.serial,
|
||||
instance->generic.btn);
|
||||
}
|
||||
82
subghz/protocols/x10/x10.h
Normal file
82
subghz/protocols/x10/x10.h
Normal file
@ -0,0 +1,82 @@
|
||||
#pragma once
|
||||
|
||||
#include "base.h"
|
||||
|
||||
#define SUBGHZ_PROTOCOL_X10_NAME "X10"
|
||||
|
||||
typedef struct SubGhzProtocolDecoderX10 SubGhzProtocolDecoderX10;
|
||||
typedef struct SubGhzProtocolEncoderX10 SubGhzProtocolEncoderX10;
|
||||
|
||||
extern const SubGhzProtocolDecoder subghz_protocol_x10_decoder;
|
||||
extern const SubGhzProtocolEncoder subghz_protocol_x10_encoder;
|
||||
extern const SubGhzProtocol subghz_protocol_x10;
|
||||
|
||||
/**
|
||||
* Allocate SubGhzProtocolDecoderX10.
|
||||
* @param environment Pointer to a SubGhzEnvironment instance
|
||||
* @return SubGhzProtocolDecoderFaacSLH* pointer to a SubGhzProtocolDecoderX10 instance
|
||||
*/
|
||||
void* subghz_protocol_decoder_x10_alloc(SubGhzEnvironment* environment);
|
||||
|
||||
/**
|
||||
* Free SubGhzProtocolDecoderX10.
|
||||
* @param context Pointer to a SubGhzProtocolDecoderX10 instance
|
||||
*/
|
||||
void subghz_protocol_decoder_x10_free(void* context);
|
||||
|
||||
/**
|
||||
* Reset decoder SubGhzProtocolDecoderX10.
|
||||
* @param context Pointer to a SubGhzProtocolDecoderX10 instance
|
||||
*/
|
||||
void subghz_protocol_decoder_x10_reset(void* context);
|
||||
|
||||
/**
|
||||
* Parse a raw sequence of levels and durations received from the air.
|
||||
* @param context Pointer to a SubGhzProtocolDecoderX10 instance
|
||||
* @param level Signal level true-high false-low
|
||||
* @param duration Duration of this level in, us
|
||||
*/
|
||||
void subghz_protocol_decoder_x10_feed(void* context, bool level, uint32_t duration);
|
||||
|
||||
/**
|
||||
* Validates if the current data is valid.
|
||||
*
|
||||
* @param decoder Pointer to a SubGhzProtocolDecoderX10 instance.
|
||||
* @return true if packet data is valid
|
||||
* @return false if packet data in not valid
|
||||
*/
|
||||
bool subghz_protocol_x10_validate(void* context);
|
||||
|
||||
/**
|
||||
* Getting the hash sum of the last randomly received parcel.
|
||||
* @param context Pointer to a SubGhzProtocolDecoderFaacSLH instance
|
||||
* @return hash Hash sum
|
||||
*/
|
||||
uint8_t subghz_protocol_decoder_x10_get_hash_data(void* context);
|
||||
|
||||
/**
|
||||
* Serialize data SubGhzProtocolDecoderX10.
|
||||
* @param context Pointer to a SubGhzProtocolDecoderX10 instance
|
||||
* @param flipper_format Pointer to a FlipperFormat instance
|
||||
* @param preset The modulation on which the signal was received, SubGhzRadioPreset
|
||||
* @return true On success
|
||||
*/
|
||||
bool subghz_protocol_decoder_x10_serialize(
|
||||
void* context,
|
||||
FlipperFormat* flipper_format,
|
||||
SubGhzRadioPreset* preset);
|
||||
|
||||
/**
|
||||
* Deserialize data SubGhzProtocolDecoderX10.
|
||||
* @param context Pointer to a SubGhzProtocolDecoderX10 instance
|
||||
* @param flipper_format Pointer to a FlipperFormat instance
|
||||
* @return true On success
|
||||
*/
|
||||
bool subghz_protocol_decoder_x10_deserialize(void* context, FlipperFormat* flipper_format);
|
||||
|
||||
/**
|
||||
* Getting a textual representation of the received data.
|
||||
* @param context Pointer to a SubGhzProtocolDecoderX10 instance
|
||||
* @param output Resulting text
|
||||
*/
|
||||
void subghz_protocol_decoder_x10_get_string(void* context, FuriString* output);
|
||||
Loading…
Reference in New Issue
Block a user