33 lines
1.5 KiB
Markdown
33 lines
1.5 KiB
Markdown
# BASIC DEMO
|
|
## Introduction
|
|
This project is to learn how to build a custom component (an up-down knob) for a scene for the Flipper Zero.
|
|
|
|
TODO: WRITE TUTORIAL ON CREATING THE KNOB COMPONENT.
|
|
|
|
## Installation Directions
|
|
This project is intended to be overlayed on top of an existing firmware repo.
|
|
- Clone, Build & Deploy an existing flipper zero firmware repo. See this [tutorial](/firmware/updating/README.md) for updating firmware.
|
|
- Copy the "knob_component" [folder](..) to the \applications\plugins\knob_component folder in your firmware.
|
|
- Build & deploy the firmware. See this [tutorial](/firmware/updating/README.md) for updating firmware.
|
|
- NOTE: You can also extract the knob_component.FAP from resources.tar file and use qFlipper to copy the file to the SD Card/apps/Misc folder.
|
|
|
|
|
|
## Running the updated firmware
|
|
These directions assume you are starting at the flipper desktop. If not, please press the back button until you are at the desktop.
|
|
|
|
- Press the OK button on the flipper to pull up the main menu.
|
|
- Choose "Applications" from the menu.
|
|
- Choose "Misc" from the sub-menu.
|
|
- Choose "Knob Demo"
|
|
|
|
- The flipper should say "VOLUME" and "Knob demo 50".
|
|
- Press UP/DOWN buttons to change value.
|
|
- Press OK button to switch to "FREQUENCY" and "Knob demo 440".
|
|
- Press UP/DOWN buttons to change value.
|
|
- Press OK button to go to "VOLUME".
|
|
- Press BACK button for last page.
|
|
- Keep pressing BACK button until exit.
|
|
|
|
|
|
## How it works
|
|
TODO: WRITE TUTORIAL ON CREATING THE KNOB COMPONENT. |