76 lines
4.1 KiB
Markdown
76 lines
4.1 KiB
Markdown
# flipper-zero-tutorials
|
|
[Discord invite: NsjCvqwPAd](https://discord.com/invite/NsjCvqwPAd)
|
|
|
|
[YouTube: @MrDerekJamison](https://YouTube.com/@MrDerekJamison)
|
|
|
|
I will use this repository for my Flipper Zero projects. The various README.md files should describe how to use the files on your Flipper Zero.
|
|
|
|
Feel free to reach out to me at Discord with any questions or leave them in the [issues section](https://github.com/jamisonderek/flipper-zero-tutorials/issues) for this project.
|
|
|
|
|
|
## YouTube
|
|
### videos
|
|
[video index](./youtube/README.md) - This is a list of my various YouTube video tutorials.
|
|
|
|
|
|
## Electronics
|
|
### electronics projects
|
|
[parts list](./electronics/README.md) - This is a list of electronics parts that I will be using in my videos or tutorials.
|
|
|
|
|
|
## Firmware
|
|
### firmware-updating
|
|
[tutorial](./firmware/updating/README.md) - The Flipper Zero makes updating the firmware simple and fairly safe. It is easy to build your own firmware as well using the fbt command.
|
|
|
|
|
|
## GPIO
|
|
### wiegand
|
|
[project](./gpio/wiegand/README.md) - This is a tool for reading and writing Wiegand data. Wiegand is typically used by NFC, RFID and keypads. This tool can be used to read a Wiegand signal, save and display the data on the Flipper Zero's screen. It can also play the signal back.
|
|
|
|
### gpio-pins
|
|
[tool](./gpio/pins/README.md) - This is a set of files you can copy to your Flipper Zero so that you can easily lookup the meaning of a pin.
|
|
|
|
### hc_sr04
|
|
[project](./gpio/hc_sr04/README.md) - This is an improvement over the original HC_SR04 library so that you can get mm accuracy in measurements. It displays ultrasonic distance in both inches/cm. The readme explains how the code gets more accurate timings.
|
|
|
|
### gpio-gpio-7segment
|
|
[project](./gpio/gpio_7segment/README.md) - This application can control a common-anode or common-cathode 7-segment display. When you click the OK button the display shows a random dice roll (1-6); but you can modify code to display any number from 0-9.
|
|
|
|
### gpio-gpio-polling-demo
|
|
[tutorial](./gpio/gpio_polling_demo/README.md) - This is a "hello world" demonstration of reading a GPIO pin using polling.
|
|
|
|
### gpio-gpio-interrupt-demo
|
|
[tutorial](./gpio/gpio_interrupt_demo/README.md) - This is a "hello world" demonstration of triggering a callback when a GPIO pin transitions from VCC to GND.
|
|
|
|
### gpio-memsic_2125
|
|
[tutorial](./gpio/memsic_2125/README.md) - This is a demostration of using GPIO interrupts to interpret data from the Memsic 2125 (Mx2125) Dual-Axis Accelerometer.
|
|
|
|
|
|
## Subghz [folder](./subghz/README.md)
|
|
### subghz-plugins-subghz_demo
|
|
[tutorial](./subghz/plugins/subghz_demo/README.md) - This is a demonstration of sending & receiving radio signals using the subghz_tx_rx worker library.
|
|
|
|
### subghz-plugins-rock_paper_scissors
|
|
[game](./subghz/plugins/rock_paper_scissors/README.md) -
|
|
This is a two player game that uses the subghz_tx_rx worker library for communication. Two Flipper Zeros running this game can play Rock, Paper, Scissors against each other!
|
|
|
|
### subghz-protocol-x10-decoder
|
|
[project](./subghz/protocols/x10/README.md) - This is a protocol decoder for the Flipper Zero to decode the x10 series of devices when doing a read from the Sub-GHz menu.
|
|
|
|
### subghz-samples-chevy-hhr-2006
|
|
[data](./subghz/samples/chevy-hhr-2006/README.md) - These Flipper Zero subghz captures are from the remote control for the Chevy HHR 2006 keyfob.
|
|
|
|
### subghz-samples-quantum-fire
|
|
[data](./subghz/samples/quantum-fire/README.md) - These Flipper Zero subghz captures are from the remote control for the Quantum Fire (QF-6LR).
|
|
|
|
### subghz-samples-x10
|
|
[data](./subghz/samples/x10/README.md) - These Flipper Zero subghz captures are from the remote control for the X10.
|
|
|
|
## Marauder
|
|
[tutorial](./marauder/README.md) - This is a tutorial on how to use the Marauder tool to attack 2.4GHz devices.
|
|
|
|
[tool](./marauder/secret_ssid/README.md) - This is a tool that can be used to send a secret message over WiFi. The message is encoded into a SSID, which is then sent out over WiFi. The message can be decoded on a PC.
|
|
|
|
## Support
|
|
[Buy me a coffee](https://ko-fi.com/codeallnight) - Thanks for supporting my work.
|