flipper-zero-tutorials/subghz/samples/quantum-fire/README.md
2023-02-03 14:57:52 -05:00

1.4 KiB

Quantum Fire (QF-6LR)

Device

These Flipper Zero subghz captures are from the remote control for the Quantum Fire (QF-6LR). This remote operates at 433.91MHz. There are 12 buttons (A 1-6 and B 7-12). I captured all 6 of the A buttons, and button 7 from the B buttons.

  • Model: DBR04 (Quantum Fireworks USA)
  • FCC ID: Z2F-DBR04

Demo

YouTube video of igniting fireworks using the Flipper Zero. The signals broadcast from the subghz were pre-recorded ("Read RAW", config: 433.92MHz, AM650, RSSI -70) using a remote that was paired to the ignitor. RAW_a1.sub and RAW_a2.sub were the files used in the video recording. Princeton_a1 was captured using "Read" instead of "Read RAW".

Notes

According to fccid.io user manual:

  • Frequency is 433MHz
  • Coding scheme is "Leaning code (EV1527)"
  • Speed is <10Kbps
  • Modulation is "OOK (AM)"

Reading more about EV1527 (non-rolling code, but large key space):

  • https://ripplesecurity.com.au/blogs/news/ev1527-and-ask-explained-simple says "Note that in the common basic protocol the full transmission (remote control keypress) consists of a preamble of one appr.. 320 microseconds pulse (“1”) followed by 31 zeros of the same time size (320 X 31 ~ 9900 micros, immediately followed by the 20 bits address and 4 command (button) bits all of the same time size."

The protocol is the Princeton protocol.