1.5 KiB
BASIC DEMO
Introduction
This project is to learn how to build a custom component (an up-down knob) for a scene for the Flipper Zero.
TODO: WRITE TUTORIAL ON CREATING THE KNOB COMPONENT.
Installation Directions
This project is intended to be overlayed on top of an existing firmware repo.
- Clone, Build & Deploy an existing flipper zero firmware repo. See this tutorial for updating firmware.
- Copy the "knob_component" folder to the \applications\plugins\knob_component folder in your firmware.
- Build & deploy the firmware. See this tutorial for updating firmware.
- NOTE: You can also extract the knob_component.FAP from resources.tar file and use qFlipper to copy the file to the SD Card/apps/Misc folder.
Running the updated firmware
These directions assume you are starting at the flipper desktop. If not, please press the back button until you are at the desktop.
-
Press the OK button on the flipper to pull up the main menu.
-
Choose "Applications" from the menu.
-
Choose "Misc" from the sub-menu.
-
Choose "Knob Demo"
-
The flipper should say "VOLUME" and "Knob demo 50".
-
Press UP/DOWN buttons to change value.
-
Press OK button to switch to "FREQUENCY" and "Knob demo 440".
-
Press UP/DOWN buttons to change value.
-
Press OK button to go to "VOLUME".
-
Press BACK button for last page.
-
Keep pressing BACK button until exit.
How it works
TODO: WRITE TUTORIAL ON CREATING THE KNOB COMPONENT.