diff --git a/resources/best.svg b/resources/best.svg
new file mode 100644
index 0000000..d710082
--- /dev/null
+++ b/resources/best.svg
@@ -0,0 +1,3087 @@
+
+
+
+
diff --git a/scad/best.scad b/scad/best.scad
new file mode 100644
index 0000000..f7b68bd
--- /dev/null
+++ b/scad/best.scad
@@ -0,0 +1,67 @@
+use
+include
+
+module best(bitting="",
+ outline_name="1A Standard",
+ warding_name="A") {
+
+ name = "Best SFIC";
+
+ /*
+ Bitting is specified from tip to bow, 0-9, with 0 being the shallowest cut and 9 being the deepest.
+ Example: 2536326
+ */
+
+ outlines_k = ["1A Standard"];
+ outlines_v = [[outline_points, outline_paths,
+ [-outline_points[42][0], -outline_points[37][1]],
+ engrave_points,
+ engrave_paths]];
+ wardings_k = ["A",
+ "B",
+ "C",
+ "FM"];
+ wardings_v = [warding_a_points,
+ warding_b_points,
+ warding_c_points,
+ warding_fm_points];
+
+ outline_param = key_lkup(outlines_k, outlines_v, outline_name);
+ outline_points = outline_param[0];
+ outline_paths = outline_param[1];
+ offset = outline_param[2];
+ engrave_points = outline_param[3];
+ engrave_paths = outline_param[4];
+
+ warding_points = key_lkup(wardings_k, wardings_v, warding_name);
+
+ // Best A2 system
+ cut_locations = [for(i=[.080, .230, .380, .530, .680, .830, .980]) -i*25.4];
+ depth_table = [for(i=[0.318:-0.0125:0.205]) i*25.4];
+
+ heights = key_code_to_heights(bitting, depth_table);
+
+ difference() {
+ if($children == 0) {
+ key_blank(outline_points,
+ warding_points,
+ outline_paths=outline_paths,
+ //engrave_right_points=engrave_points,
+ //engrave_right_paths=engrave_paths,
+ //engrave_left_points=engrave_points,
+ //engrave_left_paths=engrave_paths,
+ offset=offset,
+ milling_offset=30,
+ plug_diameter=10.8712);
+ } else {
+ children(0);
+ }
+ key_bitting(heights, cut_locations, .7874);
+ }
+}
+
+// Defaults
+bitting="";
+outline="1A Standard";
+warding="A";
+best(bitting, outline, warding);