flipper-zero-tutorials/plugins/basic/README.md

BASIC DEMO

Introduction

This is a basic application for the Flipper Zero. The goal of this project is to use it as a starting point for other applications.

Installation Directions

This project is intended to be overlayed on top of an existing firmware repo.

• Clone, Build & Deploy an existing flipper zero firmware repo. See this tutorial for updating firmware.
• Copy the "basic_demo" folder to the \applications\plugins\basic_demo folder in your firmware.
• Build & deploy the firmware. See this tutorial for updating firmware.
• NOTE: You can also extract the basic_demo.FAP from resources.tar file and use qFlipper to copy the file to the SD Card/apps/Misc folder.

Running the updated firmware

These directions assume you are starting at the flipper desktop. If not, please press the back button until you are at the desktop.

• Press the OK button on the flipper to pull up the main menu.

• Choose "Applications" from the menu.

• Choose "Misc" from the sub-menu.

• Choose "Basic Demo"

• The flipper should say "Basic Demo".

• Press the BACK button to exit.

How it works

• application.fam

  • specifies the name of our application.
  • specifies the entry point for our application.
  • specifies we use the GUI.
  • specifies our icon is the basic_demo.png file.
  • specifies our application can be found in the "Misc" category.

• basic_demo.png

  • The icon for our application.

• basic_demo_app.c

  • We #include the libraries we referece.
  • We define DemoEventType (so we know the reason for events)
  • We define DemoEvent (which has the event type and its data) used for adding to an event queue.
  • We define DemoData (data used by our application)
  • We define DemoContext (pointer to event queue, pointer to application data, and pointer to mutex [to safely access the data])
  • We create a basic_demo_input_callback(...) method that queues a key event.
  • We create a basic_demo_render_callback(...) method that does the screen rendering.
    • We acquire the mutex, so that no other thread can modify the data.
      • If unsuccessful, we don't render anything this frame.
    • We select the Primary font. We render the text "Basic Demo".
    • We release the mutex, so other threads may modify the data.
  • We create the entrypoint basic_demo_app(...) method
    • We configure our initial data state
    • We create a queue for events.
    • We setup view_port_draw_callback_set(...) to invoke basic_demo_render_callback when rendering should happen.
    • We setup view_port_input_callback_set(...) to invoke basic_demo_input_callback when button is pressed.
    • We open GUI and register view_port.
    • We create a message pump loop
      • We get an event from the queue.
        • If it is key message.
          • If it is a short press of back key, we set processing=false which will exit our message loop.
    • The message loop continues until processing is false.
    • We release our application resources.
    • We exit the program.