22 lines
1.1 KiB
Markdown
22 lines
1.1 KiB
Markdown
# X10
|
|
## About
|
|
[X10 Automation](https://www.x10.com/) is a home automation system.
|
|
|
|
|
|
## Device
|
|
These Flipper Zero subghz captures are from the remote control for the X10. This remote operates at 310MHz. There is a channel dial (A-P) and there are 8 buttons labeled ON and 8 buttons labeld OFF. There is a slider switch that gives buttons 9-16 instead of 1-8. There is a up button (bright) and a down button (dim).
|
|
|
|
- Model CR12A x10.com
|
|
- FCC ID: [b4ssr12a](https://fccid.io/b4ssr12a)
|
|
|
|
- Radio Shack 61-2663T (Remote 2)
|
|
- FCC ID: [b4s61-2663t](https://fccid.io/b4s61-2663t)
|
|
|
|
|
|
## Hardware
|
|
NOTE: As an Amazon Affiliate I (CodeAllNight) may earn from qualifying purchases from the amzn.to links below.
|
|
|
|
The signals were captured from the "X10 Camera Control System Remote Control Model CR12A" which you can purchase from https://amzn.to/3issZPs and should also be compatible with signals from https://amzn.to/3QEF7cM (but the timing may be slightly different).
|
|
|
|
The receiver I used is no longer for sale, but a similar module can be purchased from https://amzn.to/3CFWy6M
|