notBrad/flipper-zero-tutorials
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
6e1ced7e8b
flipper-zero-tutorials/gpio/shtc3
History
Derek Jamison 7a0540971e SHTC3 app to print id.
2023-06-11 17:15:32 -05:00
..
application.fam SHTC3 app to print id. 2023-06-11 17:15:32 -05:00
i2c_read_shtc3_app.c SHTC3 app to print id. 2023-06-11 17:15:32 -05:00
i2c_read_shtc3.png SHTC3 app to print id. 2023-06-11 17:15:32 -05:00
README.md SHTC3 app to print id. 2023-06-11 17:15:32 -05:00

README.md

SHTC3

This is just a simple console application that uses i2c to communicate with an SHTC3 temperature and humidity device. It is assumed that you have debug mode turned on (Settings, System, Debug ON). To see the logs, either connect to serial port or use https://lab.flipper.net/cli and type log then enter. Once you are viewing the logs, run the application.

The code does the following:

  • The address of the device is hard-coded to 0x70.
  • Wake-up (0x3517) is sent to wake up the device.
  • Read id (0xefc8) is sent to read the device ID.
  • The output is expected to match "(xxxx1xxxxx000111)".

Resources: