20 lines
688 B
Plaintext
20 lines
688 B
Plaintext
DANGER: Connect external modules with large capacitive load only when Flipper Zero is powered off. Otherwise, data on the microSD card can be corrupted.
|
|
|
|
This pin is 3.3 Volts output. NOTE: Some people recommend using the 5V pin (L1) and a 3.3 volt regulator with output having a parallel 10uF and 100nF capacitor; so that voltage is more stable.
|
|
|
|
Max of 1200 mA (3.96 watt).
|
|
|
|
Look at device datasheet. If 3.3 volts, connect to "VIN", "VCC", "3.3V/3V3" (if NO VIN) on the device.
|
|
|
|
Devices:
|
|
- NMEA GPS[USART] (VIN)
|
|
- DHT11[GPIO] (VCC)
|
|
- BME280[I²C] (VCC)
|
|
- BME280[SPI-MODE] (VCC)
|
|
- BMP280[SPI] (VIN)
|
|
- BH1750[I²C] (VCC)
|
|
- NRF24L01[SPI] (VCC)
|
|
- NRF24L01[SPI] (VCC)
|
|
- CC1101[SPI] (VCC)
|
|
|