History

Derek Jamison 1d8134f778 appid must be lowercase in latest firmware		2023-06-11 17:03:26 -05:00
..
application.fam	appid must be lowercase in latest firmware	2023-06-11 17:03:26 -05:00
README.md	Initial check-in for scenes demo.	2023-03-08 08:57:38 -05:00
scenes_demo_app.c	Initial check-in for scenes demo.	2023-03-08 08:57:38 -05:00
scenes_demo.png	Initial check-in for scenes demo.	2023-03-08 08:57:38 -05:00

README.md

BASIC DEMO

Introduction

This is a scenes and view application for the Flipper Zero, using both a custom 'knob' component and a widget. The goal of this project is to use demonstrate how to use sceness and views.

TODO: WRITE TUTORIAL ON SCENES AND VIEWS.

Installation Directions

This project is intended to be overlayed on top of an existing firmware repo.

Clone, Build & Deploy an existing flipper zero firmware repo. See this tutorial for updating firmware.
Copy the "scenes" folder to the \applications\plugins\scenes folder in your firmware.
Build & deploy the firmware. See this tutorial for updating firmware.
NOTE: You can also extract the scenes.FAP from resources.tar file and use qFlipper to copy the file to the SD Card/apps/Misc folder.

Running the updated firmware

These directions assume you are starting at the flipper desktop. If not, please press the back button until you are at the desktop.

Press the OK button on the flipper to pull up the main menu.
Choose "Applications" from the menu.
Choose "Misc" from the sub-menu.
Choose "Scenes Demo"
The flipper should say "VOLUME" and "Knob demo 50".
Press UP/DOWN buttons to change value.
Press OK button to switch to "FREQUENCY" and "Knob demo 440".
Press UP/DOWN buttons to change value.
Press OK button to go to Summary page.
Press UP/DOWN buttons to scroll message.
Press OK button to go to "VOLUME" page.
Press BACK button for previous page.
Keep pressing BACK button until exit.

How it works

TODO: WRITE TUTORIAL ON SCENES AND VIEWS.