# BASIC DEMO

## Introduction

This is a scenes and view application for the Flipper Zero, using both a custom
'knob' component and a widget. The goal of this project is to use demonstrate
how to use sceness and views.

TODO: WRITE TUTORIAL ON SCENES AND VIEWS.

## Installation Directions

This project is intended to be overlayed on top of an existing firmware repo.

- Clone, Build & Deploy an existing flipper zero firmware repo. See this [tutorial](/firmware/updating/README.md) for updating firmware.
- Copy the "scenes" [folder](..) to the \applications\plugins\scenes folder in your firmware.
- Build & deploy the firmware. See this [tutorial](/firmware/updating/README.md) for updating firmware.
- NOTE: You can also extract the scenes.FAP from resources.tar file and use qFlipper to copy the file to the SD Card/apps/Misc folder.

## Running the updated firmware

These directions assume you are starting at the flipper desktop. If not, please press the back button until you are at the desktop.

- Press the OK button on the flipper to pull up the main menu.
- Choose "Applications" from the menu.
- Choose "Misc" from the sub-menu.
- Choose "Scenes Demo"

- The flipper should say "VOLUME" and "Knob demo 50".
- Press UP/DOWN buttons to change value.
- Press OK button to switch to "FREQUENCY" and "Knob demo 440".
- Press UP/DOWN buttons to change value.
- Press OK button to go to Summary page.
- Press UP/DOWN buttons to scroll message.
- Press OK button to go to "VOLUME" page.
- Press BACK button for previous page.
- Keep pressing BACK button until exit.

## How it works

TODO: WRITE TUTORIAL ON SCENES AND VIEWS.