# X10
## About
[X10 Automation](https://www.x10.com/) is a home automation system.  


## Device
These Flipper Zero subghz captures are from the remote control for the X10.  This remote operates at 310MHz.  There is a channel dial (A-P) and there are 8 buttons labeled ON and 8 buttons labeld OFF.  There is a slider switch that gives buttons 9-16 instead of 1-8.  There is a up button (bright) and a down button (dim).

- Model CR12A   x10.com
- FCC ID: [b4ssr12a](https://fccid.io/b4ssr12a)

- Radio Shack  61-2663T   (Remote 2)
- FCC ID: [b4s61-2663t](https://fccid.io/b4s61-2663t)


## Hardware
NOTE: As an Amazon Affiliate I (CodeAllNight) may earn from qualifying purchases from the amzn.to links below. 

The signals were captured from the "X10 Camera Control System Remote Control Model CR12A" which you can purchase from https://amzn.to/3issZPs and should also be compatible with signals from https://amzn.to/3QEF7cM (but the timing may be slightly different).

The receiver I used is no longer for sale, but a similar module can be purchased from https://amzn.to/3CFWy6M