Send princeton signals
This commit is contained in:
parent
37252b745b
commit
8dfd5a598a
8
subghz/apps/princeton-send/README.md
Normal file
8
subghz/apps/princeton-send/README.md
Normal file
@ -0,0 +1,8 @@
|
||||
# Princeton Sender
|
||||
|
||||
This is a demo application that sends a Princeton 24-bit code using the internal radio, then
|
||||
it sends a 24-bit code using an external radio. It also enables the 5v pin for the external
|
||||
radio, in case the radio has a 5-volt to 3.3-volt regulator attached.
|
||||
|
||||
There is no UI for this project, it just sends the two signals and then exits. Hopefully you
|
||||
can borrow this code for other projects, such as sending a beacon on a time interval.
|
10
subghz/apps/princeton-send/application.fam
Normal file
10
subghz/apps/princeton-send/application.fam
Normal file
@ -0,0 +1,10 @@
|
||||
App(
|
||||
appid="princeton_send",
|
||||
name="Princeton Sender",
|
||||
apptype=FlipperAppType.EXTERNAL,
|
||||
entry_point="princeton_send_app",
|
||||
requires=["gui", "subghz"],
|
||||
stack_size=2 * 1024,
|
||||
fap_icon="princeton_send.png",
|
||||
fap_category="Sub-GHz",
|
||||
)
|
104
subghz/apps/princeton-send/princeton_send.c
Normal file
104
subghz/apps/princeton-send/princeton_send.c
Normal file
@ -0,0 +1,104 @@
|
||||
#include <furi.h>
|
||||
#include <lib/subghz/transmitter.h>
|
||||
#include <applications/drivers/subghz/cc1101_ext/cc1101_ext_interconnect.h>
|
||||
#include <lib/subghz/devices/cc1101_int/cc1101_int_interconnect.h>
|
||||
#include <flipper_format/flipper_format_i.h>
|
||||
#include <lib/subghz/protocols/protocol_items.h>
|
||||
#include <lib/subghz/devices/devices.h>
|
||||
|
||||
static void subghz_radio_device_power_on() {
|
||||
uint8_t attempts = 5;
|
||||
while(--attempts > 0) {
|
||||
if(furi_hal_power_enable_otg()) break;
|
||||
furi_delay_ms(50);
|
||||
}
|
||||
}
|
||||
|
||||
static void subghz_radio_device_power_off() {
|
||||
if(furi_hal_power_is_otg_enabled()) furi_hal_power_disable_otg();
|
||||
}
|
||||
|
||||
static void
|
||||
set_princeton(FlipperFormat* flipper_format, uint32_t key, uint32_t te, uint32_t repeat) {
|
||||
FuriString* princeton_settings = furi_string_alloc_printf(
|
||||
"Protocol: Princeton\n"
|
||||
"Bit: 24\n"
|
||||
"Key: 00 00 00 00 00 %02X %02X %02X\n"
|
||||
"TE: %lu\n"
|
||||
"Repeat: %lu\n",
|
||||
(uint8_t)((key >> 16) & 0xFFU),
|
||||
(uint8_t)((key >> 8) & 0xFFU),
|
||||
(uint8_t)(key & 0xFFU),
|
||||
te,
|
||||
repeat);
|
||||
Stream* stream = flipper_format_get_raw_stream(flipper_format);
|
||||
stream_clean(stream);
|
||||
stream_write_cstring(stream, furi_string_get_cstr(princeton_settings));
|
||||
stream_seek(stream, 0, StreamOffsetFromStart);
|
||||
furi_string_free(princeton_settings);
|
||||
}
|
||||
|
||||
static void send_princeton(uint32_t key, bool use_external_radio) {
|
||||
uint32_t frequency = 433920000;
|
||||
uint32_t te = 350;
|
||||
uint32_t repeat = 5;
|
||||
bool enable_5v = use_external_radio;
|
||||
const SubGhzDevice* device;
|
||||
|
||||
subghz_devices_init();
|
||||
if(use_external_radio) {
|
||||
if(enable_5v) {
|
||||
subghz_radio_device_power_on();
|
||||
}
|
||||
device = subghz_devices_get_by_name(SUBGHZ_DEVICE_CC1101_EXT_NAME);
|
||||
} else {
|
||||
device = subghz_devices_get_by_name(SUBGHZ_DEVICE_CC1101_INT_NAME);
|
||||
}
|
||||
|
||||
SubGhzEnvironment* environment = subghz_environment_alloc();
|
||||
subghz_environment_set_protocol_registry(environment, (void*)&subghz_protocol_registry);
|
||||
SubGhzTransmitter* transmitter = subghz_transmitter_alloc_init(environment, "Princeton");
|
||||
FlipperFormat* flipper_format = flipper_format_string_alloc();
|
||||
set_princeton(flipper_format, key, te, repeat);
|
||||
subghz_transmitter_deserialize(transmitter, flipper_format);
|
||||
subghz_devices_begin(device);
|
||||
subghz_devices_reset(device);
|
||||
subghz_devices_load_preset(device, FuriHalSubGhzPresetOok650Async, NULL);
|
||||
frequency = subghz_devices_set_frequency(device, frequency);
|
||||
|
||||
// Send
|
||||
furi_hal_power_suppress_charge_enter();
|
||||
if(subghz_devices_start_async_tx(device, subghz_transmitter_yield, transmitter)) {
|
||||
while(!(subghz_devices_is_async_complete_tx(device))) {
|
||||
furi_delay_ms(100);
|
||||
}
|
||||
|
||||
subghz_devices_stop_async_tx(device);
|
||||
}
|
||||
|
||||
// Cleanup
|
||||
subghz_devices_sleep(device);
|
||||
subghz_devices_end(device);
|
||||
subghz_devices_deinit();
|
||||
if(enable_5v) {
|
||||
subghz_radio_device_power_off();
|
||||
}
|
||||
furi_hal_power_suppress_charge_exit();
|
||||
flipper_format_free(flipper_format);
|
||||
subghz_transmitter_free(transmitter);
|
||||
subghz_environment_free(environment);
|
||||
}
|
||||
|
||||
int princeton_send_app(char* p) {
|
||||
UNUSED(p);
|
||||
|
||||
FURI_LOG_I("princeton_send", "Sending key with internal radio...");
|
||||
send_princeton(0x938475, false);
|
||||
FURI_LOG_I("princeton_send", "Sent key.");
|
||||
|
||||
FURI_LOG_I("princeton_send", "Sending key with external radio...");
|
||||
send_princeton(0x194857, true);
|
||||
FURI_LOG_I("princeton_send", "Sent key?");
|
||||
|
||||
return 0;
|
||||
}
|
BIN
subghz/apps/princeton-send/princeton_send.png
Normal file
BIN
subghz/apps/princeton-send/princeton_send.png
Normal file
Binary file not shown.
After Width: | Height: | Size: 1.8 KiB |
Loading…
Reference in New Issue
Block a user