notBrad/flipper-zero-tutorials
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Update README.md

Browse Source 
security advise for TX-mode
This commit is contained in:
Einstein2150 2024-03-05 20:22:32 +01:00 committed by GitHub
parent d5c329739a
commit 36d68f0ebc
No known key found for this signature in database
GPG Key ID: B5690EEEBB952194
1 changed files with 4 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
gpio/wiegand/README.md
View File

@ -31,6 +31,10 @@ Here is how you wire up the MOSFET and the pull-down resistors:
- For the MOSFET used for D0:
- The gate pin of the MOSFET for D0 goes to pin B3 on the Flipper. (It should also already be connected to the pull-down resistor)
- The drain pin of the MOSFET for D0 goes to pin A4 on the Flipper.
## Warning
- There is a risk when the flipper is in TX mode and the output goes low. If the device is receiving data during this time there will be a short. For this reason be sure that absoulutely no cards are being scanned while the flipper is in TX mode.
## W4: 4-bit Wiegand