From 12560931d5922c07e790b6e133e1c027eee1fe2d Mon Sep 17 00:00:00 2001
From: Derek Jamison <jamisonderek@users.noreply.github.com>
Date: Wed, 11 Oct 2023 12:17:41 -0500
Subject: [PATCH] Update README.md

Remove ufbt directions.  Clarify install directions.
---
 subghz/apps/rolling-flaws/README.md | 31 ++++++++++++++++++++++++-----
 1 file changed, 26 insertions(+), 5 deletions(-)

diff --git a/subghz/apps/rolling-flaws/README.md b/subghz/apps/rolling-flaws/README.md
index 4ca5da1..762e911 100644
--- a/subghz/apps/rolling-flaws/README.md
+++ b/subghz/apps/rolling-flaws/README.md
@@ -106,6 +106,7 @@ void subghz_protocol_decoder_keeloq_get_string(void* context, FuriString* output
     // Continue with the original code.
 ```
 
+### HCS300
 Two common hardware implementations of KeeLoq are the HCS300, which uses 10 bits in discriminator & the HCS200, which uses 8 bits.  The Flipper Zero software implementation decodes using 8 bits.  If you make a custom change to the ``.\lib\subghz\protocols\keeloq.c`` file you can return the encoded data, which will be used by the Rolling Flaws application.  For "SN00/cfw*" set to "No" to work properly, you will need these changes.  For "SN bits/cfw*" set to "10 (dec)", you will also need this changes.  These changes allow the application to see the encrypted data, which is needed for the "SN00/cfw*" and "SN bits/cfw*" features to work properly.
 
 Step 1. Change the two occurances of ``decrypt & 0x0000FFFF`` to read ``decrypt``.
@@ -150,19 +151,39 @@ Method 2: (command-line + allows for "SN00/cfw*" and "SN bits/cfw*" features + a
 - Clone the firmware repository (make sure you use ``git clone --recursive``).
 - Copy the ``rolling_flaws`` folder into your firmware's ``applications_user`` folder.
 - Build the firmware using ``fbt updater_package``.
+- Do the steps in the previous [HCS300](#hcs300) section and then reflash the device.
+  - ``fbt update_package``
+- In qFlipper choose "Install from file" and choose the .tgz file from the ``dist\f7-C`` folder.
 
 Method 3: (VS Code + allows for "SN00/cfw*" and "SN bits/cfw*" features + allows for replay feature)
-- Install VS Code
+- Install [VS Code](https://code.visualstudio.com/Download)
 - Clone the firmware repository (make sure you use ``git clone --recursive``).
 - Make sure you have run ``fbt vscode_dist`` at least once, so VSCode works properly.
 - Copy the ``rolling_flaws`` folder into your firmware's ``applications_user`` folder.
 - Ctrl+Shift+B
+- Select "[Debug] Flash (USB, with resources)"
 - Select "[Debug] Launch App on Flipper"
+- Do the steps in the previous [HCS300](#hcs300) section and then reflash the device
+  - Select "[Debug] Flash (USB, with resources)"
+  - Select "[Debug] Launch App on Flipper"
+
+```c
+mkdir \repos
+cd \repos
+git clone https://github.com/jamisonderek/flipper-zero-tutorials.git
+git clone --recursive https://github.com/flipperdevices/flipperzero-firmware
+cd flipperzero-firmware
+fbt vscode_dist
+cd applications_user
+md rolling-flaws
+cd rolling-flaws
+xcopy ..\..\..\flipper-zero-tutorials\subghz\apps\rolling-flaws\*.* . /e
+cd ..
+fbt FORCE=1 flash_usb_full 
+fbt launch APPSRC=applications_user\rolling-flaws 
+```
+
 
-Method 4: (command-line)
-- Install [ufbt](https://github.com/flipperdevices/flipperzero-ufbt)
-- Switch into the ``rolling_flaws`` folder.
-- Install and launch the app using ``ufbt launch``.
 
 ## Menu Options
 ### Config