flipper-zero-tutorials/gpio/pins/R1(9)_Red_3v3_3.3v_VCC.txt

20 lines
688 B
Plaintext
Raw Normal View History

2023-02-27 21:26:51 +00:00
DANGER: Connect external modules with large capacitive load only when Flipper Zero is powered off. Otherwise, data on the microSD card can be corrupted.
This pin is 3.3 Volts output. NOTE: Some people recommend using the 5V pin (L1) and a 3.3 volt regulator with output having a parallel 10uF and 100nF capacitor; so that voltage is more stable.
Max of 1200 mA (3.96 watt).
Look at device datasheet. If 3.3 volts, connect to "VIN", "VCC", "3.3V/3V3" (if NO VIN) on the device.
Devices:
- NMEA GPS[USART] (VIN)
- DHT11[GPIO] (VCC)
- BME280[I²C] (VCC)
- BME280[SPI-MODE] (VCC)
- BMP280[SPI] (VIN)
- BH1750[I²C] (VCC)
- NRF24L01[SPI] (VCC)
- NRF24L01[SPI] (VCC)
- CC1101[SPI] (VCC)