Flipper-IRDB/_Converted_
2022-12-18 17:26:07 +01:00
..
CSV fix: set empty names to Unknown 2022-09-09 22:54:44 +02:00
IR_Plus refactor: remove double spaces 2022-12-18 17:26:07 +01:00
Other/Maranz Add Marantz_main_zone.csv based on official Marantz 2014 IR Command sheet 2022-09-24 11:50:03 +02:00
Pronto refactor: unknownize 2022-12-18 17:18:22 +01:00
Power_off.ir Added New "Power Off" by FalsePhilosopher 2022-09-11 15:27:46 +01:00
ReadMe.md Update ReadMe.md 2022-09-26 15:18:10 -07:00

Flipper-IRDB

Maintainers/Major contributors include:

Organization

The files within the "Converted" section are only organized by manufacturer name, separated out into 0-9 and A-Z categories for ease of browsing.

To Install New Remotes On Your Flipper:

  1. Git clone this repo to your local PC. Multiple options are explained here.
  2. Open the cloned repository in a File Explorer.
  3. Connect your Flipper to your PC using a USB-C cable.
  4. Open QFlipper
  5. Verify that your Flipper shows "Connected"
  6. Ensure your Flipper is fully up-to-date:
    1. Look for the green "Update" button near the middle-right of the application.
    2. Press "Update" and allow the Flipper to complete the Update process and then reboot before continuing.
  7. Open the File Manager by selecting the "File Manager" icon (piece of paper) on the top left of the QFlipper application.
  8. Select SD Card, then navigate to the infrared folder by double-clicking its icon.
  9. Drag the .ir files you want on your Flipper from the File Explorer into the QFlipper File Manager.
  10. Disconnect the Flipper from the PC and have fun!

NOTE: If you plan to copy them all, it's highly recommended to dismount the SD card and plug it into the computer directly.

To install power_off remote on your Flipper:

  1. Rename your current projectors.ir asset from /SD Card/infrared/assets/projectors.ir in QFlipper to projectors.ir.ORG (original).
  2. Rename power_all.ir to projectors.ir
  3. Copy the "new" projectors.ir through QFlipper to the /SD Card/infrared/assets folder.
  4. Then open "Universal Remote" on your Flipper and select "Projectors".
  5. Use the POWER button to send the "Power Off" command.

NOTES: USE THIS WITH CAUTION!! This has the power functions for MULTIPLE DEVICES.

This is a BIG file with around 26,000 lines so this will take a while to run (5-6 mins).

Pressing anything other than the Power button will probably give you an error. (CH+/-, MUTE, VOL+/- WILL NOT WORK WITH power_off.ir!)