Filetype: IR signals file
Version: 1
#
# Clever&Clean AQUA-Series 03 robot vacuum. It has a remote for manual driving and basic operation mode changes
# https://cleverclean.ru/catalog.php#!/%D0%9F%D0%94%D0%A3-AQUA-Series/p/58375149/category=66165395
# there is a center key on remote as well, but Flipper does not record anything, and it does not do anything to vacuum. Or my remote has broken key =)
# timings are measured around 5 times per signal, then averaged and rounded
# currently manual drive is jerky, while with original remote it is smooth
# be careful not to burn motors on manual drive
# any improvements are welcome
#
name: POWER
type: raw
frequency: 38000
duty_cycle: 0.330000
# 3000 1000 seems to be preamble, 1500 and 750 to be bits
data: 3000 1000 750 1500 1500 750 1500 750 1500 750 750 1500 1500 750 750 1500 1500
#
name: Left
type: raw
frequency: 38000
duty_cycle: 0.330000
# message is repeated all the time button is pressed, original capture has 35000 pause before next repeat, but not at the end
# like this 3000 1000 x x x 35000 3000 1000 x x x 35000 3000 1000 x x x
data: 3000 1000 750 1500 1500 750 750 1500 750 1500 750 1500 1500 750 750 1500 1500
#
name: Up
type: raw
frequency: 38000
duty_cycle: 0.330000
data: 3000 1000 750 1500 1500 750 750 1500 750 1500 750 1500 750 1500 750 1500 1500
#
name: Right
type: raw
frequency: 38000
duty_cycle: 0.330000
data: 3000 1000 750 1500 1500 750 750 1500 750 1500 750 1500 1500 750 1500 750 1500
#
name: Down
type: raw
frequency: 38000
duty_cycle: 0.330000
data: 3000 1000 750 1500 1500 750 750 1500 750 1500 750 1500 750 1500 1500 750 1500
# I love when robot vacuum parks
name: Home
type: raw
frequency: 38000
duty_cycle: 0.330000
# original recording has 3 repeats with 5200 pauses between 1-2 and 2-3 repeats
# repeats removed because vacuum drives OK from single command
data: 3000 1000 750 1500 1500 750 750 1500 1500 750 750 1500 750 1500 1500 750 1500
#
name: Mode
type: raw
frequency: 38000
duty_cycle: 0.330000
# original recording has 3 repeats without any pause
# repeats removed because vacuum seems to jump 3 modes
data: 3000 1000 750 1500 1500 750 750 1500 750 1500 1500 750 750 1500 1500 750 1500 750
#
name: Max
type: raw
frequency: 38000
duty_cycle: 0.330000
# original recording has 3 repeats with 6500 pauses between 1-2 and 2-3 repeats
# repeats removed because vacuum drives OK from single command
data: 3000 1000 750 1500 1500 750 750 1500 750 1500 1500 750 750 1500 1500 750 750